Use of the patented Cuff Jacket Duo is recommended for Welch Allyn 52000 series monitors. The Cuff Jacket creates a controlled and repeatable cuff volume without the need for bulky mandrels. Use of the Cuff Jacket is suggested for optimum repeatability on most monitors, and is required on a few older NIBP monitors such as Welch Allyn 52000 series. If you’re experiencing C05 errors or inconsistent readings on 52000 series monitors, this accessory is essential (insert Adult size cuff inside the smaller jacket loop).

Optimizing SimCubeTM NIBP Simulation Results – This 3-page technical paper discusses NIBP device accuracy, NIBP device differences, provides tips on setting up your SimCube, and provides sample data comparing how different manufacturers’ patient monitors perform under SimCube simulation.

Click here for Technical Notes for Existing Customers

If you experience any problems with your product or would like more information, please contact Technical Support at 800-541-9802 or support@pronktech.com.

Limited Warranty

All Pronk Technologies products are warranted against defects in materials and workmanship for a period of four (4) years from the date of shipment to the original purchaser. Warranty is valid only to the original buyer. Defective equipment should be returned freight prepaid to Pronk Technologies. Equipment returned with defective parts and assemblies will be either repaired or replaced at Pronk’s discretion. This warranty is not applicable if repair has been attempted or if the unit has been damaged due to operation outside the environmental and power specifications for the product, or due to improper handling or use.

If any fault develops, notify Pronk Technologies giving full details of the difficulty, and include the model and serial number of the device. Upon receipt of shipping instructions, forward the device prepaid and repairs will be made at the factory.

The foregoing warranty is in lieu of all other warranties expressed or implied, including but not limited to any implied warranty or merchantability, fitness or adequacy for any particular purpose or use. Pronk Technologies shall not be liable for any incidental or consequential damages.

How do we go about calibrating Pronk products?

All Pronk Technologies products can be sent back to our corporate office for calibration. We have also partnered with a company called Spectrum Technologies who can come on-site to perform calibrations. You can contact them at 800-342-7748.

How often does it need calibration?

We recommend an annual calibration interval for all our test equipment products.

Are Pronk test equipment products traceable back to NIST standards?

Yes. All products test equipment products ship with a certified calibration certificate traceable back to NIST standards at no additional charge.

What is the Warranty?

All our products carry a limited four year warranty on both parts and labor. Please contact us for more details.

Is the device rugged enough to withstand a drop?

Yes. All Pronk products are designed to pass being dropped 50 times at 3.0 feet with no failures of the electronic or mechanical parts.

Do you have any reference accounts I can contact?

Yes. We have over 20,000 products in use all over the world (as of Jan. 2015) and have thousands of satisfied customers. Let us know where you are located and we can provide a detailed reference list.

Where are the products manufactured?

Pronk Technologies is located in Sun Valley, California. We manufacture all of the products here in the USA, therefore any necessary repairs or support is all readily available.

Who is Pronk Technologies?

Pronk Technologies is a small and agile company with most of our team coming from the vital signs monitoring industry. In fact, we have a combined 45 years experience designing, supporting, testing, assembling and repairing vital signs monitors. Pronk was established in 2001 by the former Director of Engineering from Medical Data Electronics.

Please email support@pronktech.com or call 800-541-9802 to obtain a Return Merchandise Authorization (RMA) number. Shipping address is Pronk Technologies, 8933 Lankershim Blvd., Sun Valley CA 91352.   Returns should be packaged securely in the original packaging materials.  The RMA number should be clearly marked on the packaging.  If the return is for a new item and is a result of our error, we will make arrangements for payment of return shipping.  Otherwise, items should be returned freight prepaid to Pronk Technologies.

All Pronk Technologies products can be sent back to our corporate office for calibration. We recommend an annual calibration interval for all our test equipment products. We have also partnered with a company called Spectrum Technologies to perform on-site calibrations as needed. You can contact them at 800-342-7748. Click Services on the main menu for further information about calibration.

Pronk Technologies is committed to protecting your privacy. We may use any information we collect about you to process sales orders and to tailor the website to your interests. This privacy statement explains how we gather information and how we protect your privacy.

Your consent: By using our website, you consent to the collection and use of this information by Pronk Technologies Inc.

The information we collect: If you decide to participate in an online survey, subscribe to an email list, enter a contest or use one of our other promotional features, or if you are requesting information and ask to be contacted by us, we may ask for your name, address, email address and other pertinent information to administer the contest, tabulate survey results, add you to subscriber lists, or to provide you with requested information. We only collect information about specific identifiable individuals when such information is volunteered.

How we use information you supply in order forms and online registration: Pronk Technologies may share its customer list (names and addresses only) to companies that offer products and services we think our customers may be interested in. If you do not wish to receive information from other companies, please send an email to privacy@pronktech.com.

Removing your information: If you give us your contact information and you wish to be removed from our database, please send an email to privacy@pronktech.com and we will remove your name.

Changes to our privacy policy: If we change our privacy policy, we will post the changes on this page.

Contacting us: Pronk Technologies welcomes your questions and comments about privacy. Click here for contact info.

Disclaimers

Pronk Technologies shall be liable only for repair or replacement of the SimCube NIBP Simulator; OxSim OX-1 SpO2 Simulator, or SimSlim SL-8 Simulator with optional features as stated under the terms of the warranty. Pronk Technologies makes no warranty of any kind with regard to the material contained in this website, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Pronk Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

This website contains proprietary information which is protected by copyright. All rights reserved.

The information in this website is subject to change without notice.

Other Terms and Conditions

The courts in Los Angeles County, California, will have exclusive jurisdiction in all disputes relating to the use of this website, and the ordering of goods and services.

These terms and conditions will be governed and construed in accordance with California law.

Pronk Technologies may change these terms and conditions with or without notice. Please review this page regularly to see any changes.

The courts in Los Angeles County, California, will have exclusive jurisdiction in all disputes relating to the use of this website, and the ordering of goods and services.

These terms and conditions will be governed and construed in accordance with California law.

Pronk Technologies may change these terms and conditions with or without notice. Please review this link regularly to see any changes.